Does this include double-wythe walls?
No, this calculates a single layer (single wythe) of brick. Multiply by 2 for a double-thick wall.
Calculator
Enter your values
Results
Total Bricks
551
Mortar Bags (80lb)
8
Wall Area
80.0 sq ft
Analysis
Interpretation of the current calculator output
Calculation Summary
The current inputs have been processed for the brick calculator. Review the results panel for the computed output and use the charts tab to compare the current values visually.
How to Read It
The main result shows the direct answer for your current inputs. Supporting sections below explain the method, example, and common questions so the result is easier to interpret.
How to Use
Step-by-step instructions
- 1Enter the length and height of the wall (in feet).
- 2Select the brick type (Standard, Modular, etc.).
- 3Adjust the mortar joint size if needed.
- 4Enter a waste percentage (typically 5-10%).
- 5The calculator will provide the total bricks and mortar bags.
Masonry Estimation
Calculates the number of units required to cover the wall area, accounting for mortar joints and waste factor.
Bricks = (Wall Area / (Brick Length + Joint) × (Brick Height + Joint)) × (1 + Waste)Variables:
AreaLength × HeightJointMortar thicknessWastePercentage for breakage/cutsExample
10x8 Wall
Inputs:
Length:10 ft
Height:8 ft
Type:Standard
Waste:5%
Steps:
- 1.Wall Area = 80 sq ft
- 2.Brick Area (w/ mortar) = (8+0.375) × (2.25+0.375) ≈ 22 sq in ≈ 0.15 sq ft
- 3.Raw Bricks = 80 / 0.15 ≈ 533
- 4.Total = 533 × 1.05 ≈ 560 bricks
Result:
560 bricks, ~7 bags mortar